There are two kinds of tv screen replacement outfit in Stellenbosch. One quotes over the phone before seeing anything, orders the most likely part, and hopes. The other opens the set, measures, finds the actual fault, and quotes what it will cost to fix that. We're the second kind, and the whole shape of how we work follows from it.
A diagnosis here means the set gets its back off and a meter on it. Supply rails checked against spec under load, not at idle. Backlight strings driven individually so a single dead LED doesn't get mistaken for a failed driver. Panel ribbons and T-Con checked before anyone starts talking about a new screen — a fair number of "cracked panel" jobs turn out to be a loose or corroded connection, which is a fraction of the cost.
What you get back is a fixed number covering the confirmed fault, the part it needs and the labour to fit it. It doesn't drift once work starts. If we open the set and find a second, unrelated problem, that's a phone call to you before anything else happens — never a line item you discover on the invoice.
Work is warranted for 12-month on our labour, parts carry their own cover, and the set is tested properly before handover: an hour of real viewing, all inputs, sound at volume, the smart platform actually loaded. One number gets you a technician — 069 423 8290.
You are also welcome to keep the parts we remove. Some people want to see the bulged capacitors or the dead backlight strip, and that is entirely reasonable — it is the clearest possible evidence of what was actually wrong. Just say so when you approve the quote and they will be left with you.
From the historic town centre to your lounge
From the historic town centre to your lounge is a shorter trip than most people assume, and it changes what a repair actually costs you in time. We work this area properly rather than treating it as an outlying zone to be visited when enough jobs stack up, which is why a call in the morning usually means a technician the same day or the next.
That coverage runs across Die Boord, Mostertsdrift, Paradyskloof and Dalsig, and the practical benefit is not just speed. It means the set often does not need to leave the house at all. A supply board, a backlight strip, an HDMI port, a failing power button assembly — these are on-site jobs when the technician arrives with the right stock, and a set that never gets moved is a set that never gets damaged in transit or lost in a workshop queue.
Where a job genuinely needs the bench — panel work, board-level soldering, anything needing a controlled environment — we collect, log the set in properly, and give you a realistic date rather than an optimistic one. You get told which category your repair falls into at the point of quoting, not discovered halfway through.
Access is worth mentioning: if the set is wall-mounted, tell us when you book. Bringing the right bracket tools and a second pair of hands is the difference between a clean job and a scratched wall. Same goes for anything above a fireplace or in a ceiling mount — we would rather plan for it.
If the television is in a flat, complex or estate with access control, let us know the arrangements when you book. Getting stuck at a boom gate is the single most common reason a scheduled visit runs late, and a name left at the gate solves it entirely.
Repair or replace — an honest local view
The repair-or-replace question comes up on most jobs in Stellenbosch, and it deserves a straighter answer than the industry usually gives it. Our rule of thumb is simple: if the repair costs more than roughly a third of what an equivalent new set would cost today, and the television is past about six years old, replacement is usually the better call. We will tell you when you are in that territory.
Panels are where this bites hardest. A cracked or failed panel on a mid-range set is frequently uneconomic — the panel is most of the manufacturing cost of the television, and fitting one is delicate work. On a large, recent, premium set the sums can still favour repair. On a five-year-old budget model they almost never do.
Almost everything else tends to favour repair, and by a wide margin. Supply boards, backlight strips, T-Con boards, HDMI ports, speaker amps, Wi-Fi modules, power buttons — these are components, not the whole product, and replacing one is a fraction of the price of a new television. A set repaired properly at this level generally runs on for years.
The waste angle matters as well. Televisions are heavy, awkward to recycle and full of material that should not end up in landfill. Where a repair is genuinely sensible, it is the better outcome on every measure — price, convenience and conscience.
Where replacement genuinely is the better call, we will take the old set away for proper recycling if you want it gone. Televisions are awkward to dispose of responsibly and heavy to move, and leaving one in a garage for two years is the usual alternative.
The faults we see most in Stellenbosch
Certain faults come round often enough in Stellenbosch that a technician can usually narrow things down from a decent description on the phone. These are the ones we see week in, week out.
- Dead set, standby light on or clicking. Almost always the power supply — bulging or dried-out capacitors on the primary side, or a protection circuit shutting the rail down because something downstream is drawing too much.
- Sound plays, screen stays black. Shine a torch at an angle on the dark screen: if you can see a faint image, the panel and mainboard are fine and the backlight has failed. That is a strip replacement, not a new screen.
- Picture with vertical or horizontal bands. Usually the T-Con board or its ribbon connections. Sometimes recoverable, sometimes panel-level — the diagnosis decides.
- Apps crash, Wi-Fi drops, remote lags. The smart module or its storage. Often repairable, and frequently mistaken for a set that is simply "too old".
- Wobbly or dead HDMI input. Port fatigue from years of plugging and unplugging. A re-soldered or replaced port is a cheap job that saves a whole television.
What these have in common is that none of them require a new set. They are component failures on a device that is otherwise sound, and the cost of putting them right is a fraction of replacement. The exception is genuine panel damage, which we will always tell you about honestly.
If your fault is not on this list, that is not unusual — describe the behaviour on 069 423 8290 and we will tell you what it points to.
Intermittent faults are the hardest to pin down, so anything you can tell us about the pattern helps enormously — whether it happens from cold, after an hour, only on one input, only after a power cut. A short video on your phone of the set misbehaving is genuinely useful and often saves a whole diagnostic visit.
What happens when you book
Booking is deliberately low-friction, because most people calling about a television are already mildly annoyed and do not want a process. Ring 069 423 8290, or send the details through the form, and you will be talking to someone who fixes these for a living rather than a call-centre script.
Four things help us bring the right parts: the brand, the screen size, roughly how old it is, and what it is doing. If you can find the model number on the sticker at the back, even better — that pins down the exact panel and supply variant, and it is the difference between a one-visit repair and a return trip.
You get an arrival window, and the technician calls before setting off. Across Die Boord, Mostertsdrift, Paradyskloof and Dalsig that usually means same-day or next-day for the routine faults, and we will say plainly if a part needs ordering rather than pretending otherwise.
What to have ready. Clear access to the back of the set — if it is wall-mounted, mention that when booking so we bring the right tools and a second pair of hands. The remote, because a surprising number of "dead TV" call-outs are a remote or a source problem. And the original power cable if you have swapped it for a different one.
After that it is our problem, not yours: diagnose, quote, fix, test, hand over, warranty. You approve the number before anything happens, and it does not change afterwards.
If you need to move the appointment, a phone call is enough and there is no charge for rescheduling. We would far rather shift a booking than have a technician arrive to an empty house — which is also why we call before setting off rather than simply turning up in the window.
Where the money goes — and where not to cut corners
It is worth knowing where the money in a repair actually goes, if only so you can tell a fair quote from a padded one. Three things make up almost any invoice: the part, the labour to fit it, and the time spent working out which part it needed in the first place.
The part. Genuine manufacturer boards carry a premium and are not always available for older models. Quality equivalents are frequently the better buy, and occasionally the better part — some aftermarket supply boards use better-rated capacitors than the originals that failed. What matters is the specification, not the branding on the box.
The labour. Fitting a supply board is quick. Rebuilding one at component level is not. Replacing backlight strips means the panel comes off the frame — delicate, slow, and the step where an inexperienced hand turns a repair into a write-off. You are paying for the second kind of care, and it is the part worth paying for.
Where not to cut corners. Under-rated capacitors that fail again in a year. Mismatched backlight strips that give uneven brightness and stress the driver. Skipping the thermal paste and pads on a mainboard swap. All of these save a little now and cost more later.
And where it is fine to be frugal: a quality equivalent part over genuine, on a set that does not warrant the premium. We will tell you which is which, and price both if you want the choice.
If you need the quote in writing for an insurer or a landlord, we will provide it in a form that is actually usable — the fault described properly, the parts itemised, the labour separated out. A one-line figure scribbled on a receipt tends to get sent back, and that wastes a fortnight.
Genuine vs compatible parts — the honest version
Genuine or compatible? The honest answer is that it depends on the part, and anyone giving you a blanket rule is selling something.
Where genuine matters. Mainboards, T-Con boards and anything carrying firmware or panel-specific timing. These are matched to the panel and the software, and a near-enough substitute produces subtle problems — wrong colour handling, missing features, HDCP failures on one input — that are miserable to chase afterwards. On these we specify genuine, or a verified pull from an identical model.
Where compatible is fine, and sometimes better. Power supply boards and backlight strips. A good equivalent supply board is frequently built with higher-rated capacitors than the original that just failed at five years old, which is precisely why it failed. Backlight strips need to match on length, LED count, voltage and colour temperature — get those right and there is no meaningful difference; get them wrong and you see it immediately as uneven brightness.
Where we simply refuse. Unbranded capacitors of unknown rating, mismatched strip sets, and anything recovered from a set that failed for a related reason. That is a warranty claim waiting to happen.
We tell you which you are getting, and why, before you approve anything. If you would rather have genuine on a part where we would normally fit an equivalent, that is your call — we will quote it either way.
Whatever goes in, you are told what it was. The invoice names the part and whether it was genuine, an equivalent or a verified pull, so there is a record if the question ever comes up. Repairers who will not tell you what they fitted are usually fitting something they would rather you did not look up.
We tell you when NOT to repair
We tell people not to repair their televisions fairly regularly, and it is worth explaining why a repair business would do that.
The simple version: a repair that was not worth doing generates an unhappy customer within a year, and unhappy customers are considerably more expensive than declined jobs. The better version: we would like to still be doing this in Stellenbosch in ten years, and that only works if the advice is honest when honesty is inconvenient.
When we will say don't. A panel failure on a mid-range set more than about five years old. Multiple simultaneous faults where the total approaches replacement cost. Water or lightning damage across several boards, where fixing one just reveals the next. Models where the essential part is genuinely unobtainable — certain older and imported sets land in this category.
What you get instead. A straight explanation of why, what an equivalent replacement would cost, and what to look for in a new set given how you actually use it. If there is anything worth salvaging — a working panel, a sound bar arrangement, a wall bracket that fits — we will say so.
You owe nothing for the advice. You are not charged for being told the truth, and you are not pressured towards a repair to justify the visit. It works the same regardless of the answer.
Second opinions are welcome, including on our own diagnosis. If another repairer has quoted you and the number feels wrong, bring us the details — we will tell you honestly if it looks fair, and we have talked people into accepting someone else's quote more than once. The diagnosis is free either way.
Local, accountable, reachable
Local, accountable, reachable — three words that mean something specific here rather than three words for a brochure.
Local means the technician who comes to you works Stellenbosch routinely and knows the area. It means we carry stock for Samsung, LG and Sony sets across homes and student accommodation because that is what people here own. And it means same or next day turnaround is a normal expectation on routine faults rather than a marketing claim, because nobody is driving three hours to reach you.
Accountable means one business takes responsibility for the outcome. Not a lead-generation site that sells your details to whoever bids, not a franchise that disowns the operator when something goes wrong. If a repair we did fails, you phone us and we come back — no escalation path required.
Reachable means 069 423 8290 is answered by someone who can actually help, during working hours, without a menu tree. It also means that after a job you have a direct line to the person who did the work rather than a general enquiries address.
None of it matters until a repair fails, which is precisely why we put the 12-month workmanship warranty in writing rather than implying it. Written down, it is a commitment.
You will also hear from us when something changes. If a part is delayed, you get told before the day of the appointment rather than on it. That sounds like a small thing until you have taken a morning off work for a visit that was never going to happen.
If something goes wrong
Warranties are easy to advertise and awkward to honour, so it is worth setting out exactly what ours covers, what it does not, and how to use it — before you need it rather than after.
What is covered. Our workmanship for 12-month from the date of handover. If the fault we repaired comes back, we return and put it right at no charge, including the call-out. Parts we supply carry their manufacturer's cover on top of that, and we handle the claim rather than sending you to do it.
What is not. New and unrelated faults, which are quoted fresh. Physical damage after the repair — a knock, a dropped remote through the screen, a spill. Damage from a surge or lightning strike after handover, which is an insurance matter rather than a workmanship one. Or anything another repairer has touched since, which we cannot reasonably stand behind.
How to claim. Phone 069 423 8290 with the job details. There is no form and no portal. We keep the record of what was done and which parts went in, so the conversation starts from what we already know rather than from your description of a repair you did not perform.
One practical suggestion: keep the invoice. Not because we will refuse without it, but because it has the model, the parts and the date on it, and that makes any future conversation about the set faster for everybody.
We keep the job record on our side regardless — model, fault, parts, dates and who did the work. So even if the invoice has long since disappeared into a drawer, a phone call with your address and rough date is usually enough for us to find the job and pick up the conversation from there.
TV Screen Replacement in Stellenbosch — common questions
Can you fix a cracked or smashed screen?
Sometimes, and we'll give you an honest cost comparison before you commit. Screen panels are by far the most expensive single component in a TV, so on a large or older set, the repair cost can approach the price of an equivalent new TV — in which case we'll say so plainly. On smaller or newer sets, panel replacement is often genuinely worthwhile.
My smart TV apps keep crashing or Wi-Fi won't connect — is that a hardware fault?
Usually not. Most smart-platform faults — crashing apps, frozen menus, Wi-Fi that won't hold — are software issues: full storage, corrupted app data or outdated firmware. We try the free software fixes first (cache clearing, firmware updates, a careful factory reset) before treating it as a hardware fault.
What information should I have ready when I call?
The brand and approximate screen size, roughly how old the TV is, and what it's actually doing (or not doing) — a black screen with sound still playing is a very different fault from a TV that's completely dead. A photo or short video sent on WhatsApp helps us prepare and often speeds up the diagnosis.
Which TV brands do you repair?
All major brands, including Samsung, LG and Sony sets across homes and student accommodation — we're not tied to any manufacturer, so the advice on repair vs replace is based on your specific TV, not on what we happen to stock. See our brand guides at /brands/ for what we know about each manufacturer's common fault patterns.
My TV won't turn on at all — what's usually wrong?
In the large majority of cases, a failed power supply board or worn-out capacitors — one of the most common and most affordable TV repairs there is. A telltale sign is a faint click or pop when you try to switch it on. We test the board properly before quoting, since a small number of "won't turn on" cases are actually a mainboard fault instead.
Do you offer on-site repairs, or do I need to bring the TV in?
Both — whichever suits you and the fault. Many faults (power boards, HDMI ports, sound issues, software faults) can be diagnosed and often fixed on-site. Screen replacements and some mainboard repairs are usually better handled at the workshop, and we can collect and deliver if that's easier for you. We'll recommend the right option once we know the symptom.
Do you use genuine or compatible parts?
Both, depending on the component — and we'll tell you which one you're getting. Power boards, capacitors and HDMI connectors have a mature, reliable compatible-parts market we use confidently. Screen panels and mainboards lean toward genuine or manufacturer-matched parts, where compatibility matters more. Either way, every part carries our 12-month workmanship warranty.
Is my TV worth repairing, or should I just buy a new one?
It depends on the fault, the TV's age and its size — and we'll tell you honestly rather than quote every job regardless. Common faults (power boards, backlights, HDMI ports, sound, smart-platform issues) are almost always worth repairing on sets under about six years old. Large cracked panels on older sets are the main case where replacement can be the better value, and we'll say so plainly during the free diagnosis.