There are two kinds of new tv setup & installation outfit in Welkom. One quotes over the phone before seeing anything, orders the most likely part, and hopes. The other opens the set, measures, finds the actual fault, and quotes what it will cost to fix that. We're the second kind, and the whole shape of how we work follows from it.
A diagnosis here means the set gets its back off and a meter on it. Supply rails checked against spec under load, not at idle. Backlight strings driven individually so a single dead LED doesn't get mistaken for a failed driver. Panel ribbons and T-Con checked before anyone starts talking about a new screen — a fair number of "cracked panel" jobs turn out to be a loose or corroded connection, which is a fraction of the cost.
The result is one price, agreed up front covering the confirmed fault, the part it needs and the labour to fit it. It doesn't drift once work starts. If we open the set and find a second, unrelated problem, that's a phone call to you before anything else happens — never a line item you discover on the invoice.
Work is warranted for 12-month on our labour, parts carry their own cover, and the set is tested properly before handover: an hour of real viewing, all inputs, sound at volume, the smart platform actually loaded. One number gets you a technician — 069 423 8290.
You are also welcome to keep the parts we remove. Some people want to see the bulged capacitors or the dead backlight strip, and that is entirely reasonable — it is the clearest possible evidence of what was actually wrong. Just say so when you approve the quote and they will be left with you.
Power surges and load shedding — the quiet TV killer
If there is one thing that kills televisions in Free State faster than anything else, it is the electricity supply. Load shedding is not simply an inconvenience for a TV — it is a repeated, violent cycle of power loss and restoration, and the moment of restoration is where the damage happens. The surge that arrives when the grid comes back is short, sharp and entirely capable of taking out a supply board that would otherwise have run for another decade.
Sets seldom die on the first surge. Electrolytic capacitors on the primary side lose capacity a little at a time, the set starts taking longer to come out of standby, then one day it clicks and does nothing. By that point the repair is a supply board rebuild rather than a single component, which is why the early symptoms are worth acting on.
What actually protects a set: a decent surge-protected multiplug is the bare minimum and costs less than a takeaway. Better is a UPS or inverter feeding the entertainment unit, which removes the hard power cut entirely. Best, if you are already running an inverter, is making sure the TV is on the protected circuit rather than an unprotected wall socket two metres away — we see that mistake constantly.
And yes, unplugging in a lightning storm is still sound. Direct strikes and nearby induced surges are a different order of magnitude, and no consumer-grade protector is going to absorb one. If a set has taken a hit, tell the technician — it changes what gets checked first.
If the damage was clearly caused by a surge or a strike, ask us for a written assessment. Most household policies cover lightning and power-surge damage to electronics, and a proper technician's report describing the specific components that failed is usually what an insurer needs. It costs you nothing to have it written up.
Repair or replace — an honest local view
The repair-or-replace question comes up on most jobs in Welkom, and it deserves a straighter answer than the industry usually gives it. Our rule of thumb is simple: if the repair costs more than roughly a third of what an equivalent new set would cost today, and the television is past about six years old, replacement is usually the better call. We will tell you when you are in that territory.
The panel is the usual dealbreaker. A cracked or failed panel on a mid-range set is frequently uneconomic — the panel is most of the manufacturing cost of the television, and fitting one is delicate work. On a large, recent, premium set the sums can still favour repair. On a five-year-old budget model they almost never do.
Almost everything else tends to favour repair, and by a wide margin. Supply boards, backlight strips, T-Con boards, HDMI ports, speaker amps, Wi-Fi modules, power buttons — these are components, not the whole product, and replacing one is a fraction of the price of a new television. A set repaired properly at this level generally runs on for years.
The waste angle matters as well. Televisions are heavy, awkward to recycle and full of material that should not end up in landfill. Where a repair is genuinely sensible, it is the better outcome on every measure — money, hassle and rubbish.
Where replacement genuinely is the better call, we will take the old set away for proper recycling if you want it gone. Televisions are awkward to dispose of responsibly and heavy to move, and leaving one in a garage for two years is the usual alternative.
The faults we see most in Welkom
Certain faults come round often enough in Welkom that a technician can usually narrow things down from a decent description on the phone. These are the ones we see week in, week out.
- Dead set, standby light on or clicking. Almost always the power supply — bulging or dried-out capacitors on the primary side, or a protection circuit shutting the rail down because something downstream is drawing too much.
- Sound plays, screen stays black. Shine a torch at an angle on the dark screen: if you can see a faint image, the panel and mainboard are fine and the backlight has failed. That is a strip replacement, not a new screen.
- Picture with vertical or horizontal bands. Usually the T-Con board or its ribbon connections. Sometimes recoverable, sometimes panel-level — the diagnosis decides.
- Apps crash, Wi-Fi drops, remote lags. The smart module or its storage. Often repairable, and frequently mistaken for a set that is simply "too old".
- Wobbly or dead HDMI input. Port fatigue from years of plugging and unplugging. A re-soldered or replaced port is a cheap job that saves a whole television.
What these have in common is that none of them require a new set. They are component failures on a device that is otherwise sound, and the cost of putting them right is a fraction of replacement. The exception is genuine panel damage, which we will always tell you about honestly.
If your fault is not on this list, that is not unusual — describe the behaviour on 069 423 8290 and we will tell you what it points to.
Intermittent faults are the hardest to pin down, so anything you can tell us about the pattern helps enormously — whether it happens from cold, after an hour, only on one input, only after a power cut. A short video on your phone of the set misbehaving is genuinely useful and often saves a whole diagnostic visit.
How it works, start to finish
Start to finish, new tv setup & installation in Welkom runs through five steps, and you know what is happening at each one.
1. The call. You describe what the set is doing. We ask a handful of narrowing questions — make and rough age, whether there is any picture under a torch, whether it clicks, what changed just before it started. That is usually enough to bring the right stock along.
2. The diagnosis. Free, and a real one. Back off, meter on, rails measured under load, backlight strings driven individually, connections checked before anything is condemned. This is the step cowboys skip, and it is the step that determines whether the quote you get is honest.
3. The quote. One fixed number covering the confirmed fault, the part and the labour. You approve it before anything is ordered or touched. If we find a second unrelated fault once we are inside, you get a phone call, not a bigger invoice.
4. The repair. On-site where the job allows, which is most of the time. Bench work where it genuinely needs a controlled environment, with a realistic date given up front rather than an optimistic one.
5. The handover. The set runs properly before we leave — real viewing time, every input checked, sound at volume, the smart platform actually loaded and signed in. The 12-month workmanship warranty begins the moment we leave.
Payment is on completion, after that tested handover. Not before, and not in stages.
You get a proper invoice listing the fault, the parts fitted and the warranty period. Keep it — it is the fastest route to a warranty conversation later, and if you ever sell the set it is worth having evidence that the supply was rebuilt rather than limping.
Fixed quotes, honest maths
We quote fixed for a reason. This trade has a reputation problem, and vague diagnostic fees that balloon once the case is open are where most of the horror stories start. Your new tv setup & installation quote in Welkom is built from a real diagnosis of your actual set — the confirmed fault, the part it needs, the labour to fit it — and once you approve it, the number does not move.
It stands even if the repair takes longer than we thought. If the work runs over, that is our misjudgement to absorb. The whole point of a fixed price is that the risk of a wrong estimate sits with the person who made the estimate.
The one thing that will prompt a fresh conversation is a genuinely separate fault — a failing panel discovered behind a supply problem, say. That is a phone call to you, with a new number and a real choice about whether to proceed, before anything further is touched. It is never a line item you find on the invoice afterwards.
What is included. The diagnosis, the part, the labour, the testing, and the 12-month workmanship warranty. What is not. Anything you have not agreed to.
Payment is on completion, after the tested handover — not a deposit up front, not staged payments, and not before the set is working in front of you. That arrangement is deliberate: it keeps the incentive where it belongs.
Multiple sets in one place get quoted individually but visited once, which usually makes the labour work out better for you than three separate call-outs. Guesthouses, offices and sports bars tend to fall into this category, and it is worth mentioning up front so we allow the time.
Genuine vs compatible parts — the honest version
Genuine or compatible? The honest answer is that it depends on the part, and anyone giving you a blanket rule is selling something.
Where genuine matters. Mainboards, T-Con boards and anything carrying firmware or panel-specific timing. These are matched to the panel and the software, and a near-enough substitute produces subtle problems — wrong colour handling, missing features, HDCP failures on one input — that are miserable to chase afterwards. On these we specify genuine, or a verified pull from an identical model.
Where compatible is fine, and sometimes better. Power supply boards and backlight strips. A good equivalent supply board is frequently built with higher-rated capacitors than the original that just failed at five years old, which is precisely why it failed. Backlight strips need to match on length, LED count, voltage and colour temperature — get those right and there is no meaningful difference; get them wrong and you see it immediately as uneven brightness.
Where we simply refuse. Unbranded capacitors of unknown rating, mismatched strip sets, and anything recovered from a set that failed for a related reason. It is not worth the callback.
The quote says which route we are taking, and why, before you approve anything. If you would rather have genuine on a part where we would normally fit an equivalent, that is your call — we will quote it either way.
Whatever goes in, you are told what it was. The invoice names the part and whether it was genuine, an equivalent or a verified pull, so there is a record if the question ever comes up. Repairers who will not tell you what they fitted are usually fitting something they would rather you did not look up.
Local, accountable, reachable
Local, accountable, reachable — three words that mean something specific here rather than three words for a brochure.
Local means the technician who comes to you works Welkom routinely and knows the area. It means we carry stock for Samsung and Hisense LED sets because that is what people here own. And it means next-day turnaround is a normal expectation on routine faults rather than a marketing claim, because nobody is driving three hours to reach you.
Accountable means one business takes responsibility for the outcome. Not a lead-generation site that sells your details to whoever bids, not a franchise that disowns the operator when something goes wrong. If a repair we did fails, you phone us and we come back — no escalation path required.
Reachable means 069 423 8290 is answered by someone who can actually help, during working hours, without a menu tree. It also means that after a job you have a direct line to the person who did the work rather than a general enquiries address.
None of it matters until a repair fails, which is precisely why we put the 12-month workmanship warranty in writing rather than implying it. On paper it is enforceable.
You will also hear from us when something changes. If a part is delayed, you get told before the day of the appointment rather than on it. That sounds like a small thing until you have taken a morning off work for a visit that was never going to happen.
Why Welkom chooses us
There is no shortage of people in Welkom who will collect your television and return it eventually. The reasons customers here stay with us are mundane rather than dramatic, which is rather the point.
The diagnosis is free and it is real. Not a glance and a guess — a meter on the rails, backlight strings driven individually, connections checked before anything is condemned. You get told what is actually wrong, whether or not you go ahead with us.
The quote is fixed before work starts. You approve a number, and that is the number. No diagnostic fee that appears regardless, no discovery halfway through that the job is suddenly larger.
Most repairs happen in your house. Working across Bedelia, Naudeville, St Helena and Riebeeckstad with the right stock on board means the set usually never leaves — no transit damage, no workshop queue, no fortnight without a television.
The same technician sees it through. Sipho Mtshali and the team diagnose and return to fit, so nobody re-learns your set from scratch and nothing gets lost between people.
We say when not to repair. If replacement is the better buy, that is what you will hear, with the reasoning. A declined job costs us less than a bad reputation.
None of that is remarkable — it is just what a competent trade should look like. It is apparently rarer than it should be.
Business and trade customers get the same terms with a bit more structure: consolidated invoicing, scheduled visits around trading hours, and a single point of contact rather than a new conversation each time. Guesthouses, sports bars, offices and estates are a decent share of what we do.
If something goes wrong
Warranties are easy to advertise and awkward to honour, so it is worth setting out exactly what ours covers, what it does not, and how to use it — before you need it rather than after.
What is covered. Our workmanship for 12-month from the date of handover. If the fault we repaired comes back, we return and put it right at no charge, including the call-out. Parts we supply carry their manufacturer's cover on top of that, and we handle the claim rather than sending you to do it.
What is not. New and unrelated faults, which are quoted fresh. Physical damage after the repair — a knock, a dropped remote through the screen, a spill. Damage from a surge or lightning strike after handover, which is an insurance matter rather than a workmanship one. And any work done by someone else in between, which we cannot reasonably stand behind.
How to claim. Phone 069 423 8290 with the job details. There is no form and no portal. We keep the record of what was done and which parts went in, so the conversation starts from what we already know rather than from your description of a repair you did not perform.
A small piece of advice: keep the invoice. Not because we will refuse without it, but because it has the model, the parts and the date on it, and that makes any future conversation about the set faster for everybody.
We keep the job record on our side regardless — model, fault, parts, dates and who did the work. So even if the invoice has long since disappeared into a drawer, a phone call with your address and rough date is usually enough for us to find the job and pick up the conversation from there.
New TV Setup & Installation in Welkom — common questions
Do you use genuine or compatible parts?
Both, depending on the component — and we'll tell you which one you're getting. Power boards, capacitors and HDMI connectors have a mature, reliable compatible-parts market we use confidently. Screen panels and mainboards lean toward genuine or manufacturer-matched parts, where compatibility matters more. Either way, every part carries our 12-month workmanship warranty.
What does the 12-month warranty cover?
The repair we performed: the part we fitted and the labour to fit it. If the specific fault we fixed comes back within the warranty period, we return and repair it free — one phone call, no forms. It doesn't cover a new, unrelated fault developing afterward, which we'd diagnose and quote separately.
Do you repair TVs you didn't sell or previously service?
All the time — most of our Welkom work is TVs bought from a retailer, not from us. We diagnose with proper test equipment, quote the fix fixed, and repair every major brand. You don't need any prior relationship with us to get a fair diagnosis and quote.
Do you service St Helena, Bedelia, Naudeville and Riebeeckstad?
Yes — Welkom and its surrounds including Bedelia, Naudeville, St Helena and Riebeeckstad are part of our standing coverage, with Sipho Mtshali in the area regularly. If you're just outside the listed suburbs, call 069 423 8290 anyway; listed areas are our patches, not our limits.
How quickly can you repair my TV in Welkom?
Most common faults — power boards, HDMI ports, sound, smart-platform issues — are repaired the same visit where we stock the part. Turnaround in Welkom is typically next-day. Ordered parts, like screen panels, usually take a few working days once confirmed. If your TV is out for something urgent, say so when you call 069 423 8290 and we prioritise where we can.
Can you fix a cracked or smashed screen?
Sometimes, and we'll give you an honest cost comparison before you commit. Screen panels are by far the most expensive single component in a TV, so on a large or older set, the repair cost can approach the price of an equivalent new TV — in which case we'll say so plainly. On smaller or newer sets, panel replacement is often genuinely worthwhile.
My TV won't turn on at all — what's usually wrong?
In the large majority of cases, a failed power supply board or worn-out capacitors — one of the most common and most affordable TV repairs there is. A telltale sign is a faint click or pop when you try to switch it on. We test the board properly before quoting, since a small number of "won't turn on" cases are actually a mainboard fault instead.
Which TV brands do you repair?
All major brands, including Samsung and Hisense LED sets — we're not tied to any manufacturer, so the advice on repair vs replace is based on your specific TV, not on what we happen to stock. See our brand guides at /brands/ for what we know about each manufacturer's common fault patterns.