Most people arrive at new tv setup & installation in Pretoria at the point of mild irritation rather than crisis. The picture flickers when it's cold. The set takes four attempts to wake up. There's a click-click-click from behind the panel and then nothing. None of it is an emergency, all of it is a symptom, and most of it gets cheaper to fix the sooner someone competent looks at it.
This is why the diagnosis matters: the visible symptom and the underlying fault are often two different things. A set that won't power on might have a failed standby rail, a dried-out capacitor on the supply, or a mainboard that is holding the supply in protection because something downstream is shorted. Same symptom, three different jobs, three very different prices. Quoting before knowing which one it is means either overcharging you or absorbing a loss — and repairers who do that don't stay in business being generous.
So we test first. Free, no obligation, and you get told what the fault actually is in plain language, along with what it costs to put right and how long the part takes to arrive. Then you decide.
Everything after that is straightforward: fixed price, 12-month workmanship warranty, tested handover, and a technician you can phone directly if anything is off. Give us a ring on 069 423 8290 and describe the behaviour — you don't need the right vocabulary, just tell us what you're seeing.
There is no call-out fee here, and no charge for the diagnosis whether or not you proceed. That is worth checking with anyone you call, because a fee that applies regardless quietly changes the incentive — once you have paid to have someone look, you are far more likely to accept whatever they recommend.
Power surges and load shedding — the quiet TV killer
If there is one thing that kills televisions in Gauteng faster than anything else, it is the electricity supply. Load shedding is not simply an inconvenience for a TV — it is a repeated, violent cycle of power loss and restoration, and the moment of restoration is where the damage happens. The surge that arrives when the grid comes back is short, sharp and entirely capable of taking out a supply board that would otherwise have run for another decade.
It rarely fails all at once. Electrolytic capacitors on the primary side lose capacity a little at a time, the set starts taking longer to come out of standby, then one day it clicks and does nothing. By that point the repair is a supply board rebuild rather than a single component, which is why the early symptoms are worth acting on.
What actually protects a set: a decent surge-protected multiplug is the bare minimum and costs less than a takeaway. Better is a UPS or inverter feeding the entertainment unit, which removes the hard power cut entirely. Best, if you are already running an inverter, is making sure the TV is on the protected circuit rather than an unprotected wall socket two metres away — we see that mistake constantly.
The old advice about storms still holds. Direct strikes and nearby induced surges are a different order of magnitude, and no consumer-grade protector is going to absorb one. If a set has taken a hit, tell the technician — it changes what gets checked first.
If the damage was clearly caused by a surge or a strike, ask us for a written assessment. Most household policies cover lightning and power-surge damage to electronics, and a proper technician's report describing the specific components that failed is usually what an insurer needs. It costs you nothing to have it written up.
From Brooklyn Mall to your lounge
From Brooklyn Mall to your lounge is a shorter trip than most people assume, and it changes what a repair actually costs you in time. We work this area properly rather than treating it as an outlying zone to be visited when enough jobs stack up, which is why a call in the morning usually means a technician the same day or the next.
That coverage runs across Menlo Park, Brooklyn, Hatfield, Waterkloof and Garsfontein, and the practical benefit is not just speed. It means the set often does not need to leave the house at all. A supply board, a backlight strip, an HDMI port, a failing power button assembly — these are on-site jobs when the technician arrives with the right stock, and a set that never gets moved is a set that never gets damaged in transit or lost in a workshop queue.
Where a job genuinely needs the bench — panel work, board-level soldering, anything needing a controlled environment — we collect, log the set in properly, and give you a realistic date rather than an optimistic one. You get told which category your repair falls into at the point of quoting, not discovered halfway through.
Access is worth mentioning: if the set is wall-mounted, tell us when you book. Bringing the right bracket tools and a second pair of hands is the difference between a clean job and a scratched wall. Same goes for anything above a fireplace or in a ceiling mount — forewarned is a faster job.
If the television is in a flat, complex or estate with access control, let us know the arrangements when you book. Getting stuck at a boom gate is the single most common reason a scheduled visit runs late, and a name left at the gate solves it entirely.
The faults we see most in Pretoria
Certain faults come round often enough in Pretoria that a technician can usually narrow things down from a decent description on the phone. These are the ones we see week in, week out.
- Dead set, standby light on or clicking. Almost always the power supply — bulging or dried-out capacitors on the primary side, or a protection circuit shutting the rail down because something downstream is drawing too much.
- Sound plays, screen stays black. Shine a torch at an angle on the dark screen: if you can see a faint image, the panel and mainboard are fine and the backlight has failed. That is a strip replacement, not a new screen.
- Picture with vertical or horizontal bands. Usually the T-Con board or its ribbon connections. Sometimes recoverable, sometimes panel-level — the diagnosis decides.
- Apps crash, Wi-Fi drops, remote lags. The smart module or its storage. Often repairable, and frequently mistaken for a set that is simply "too old".
- Wobbly or dead HDMI input. Port fatigue from years of plugging and unplugging. A re-soldered or replaced port is a cheap job that saves a whole television.
The pattern worth noticing is that none of them require a new set. They are component failures on a device that is otherwise sound, and the cost of putting them right is a fraction of replacement. The exception is genuine panel damage, which we will always tell you about honestly.
If your fault is not on this list, that is not unusual — describe the behaviour on 069 423 8290 and we will tell you what it points to.
Intermittent faults are the hardest to pin down, so anything you can tell us about the pattern helps enormously — whether it happens from cold, after an hour, only on one input, only after a power cut. A short video on your phone of the set misbehaving is genuinely useful and often saves a whole diagnostic visit.
What happens when you book
Booking is deliberately low-friction, because most people calling about a television are already mildly annoyed and do not want a process. Ring 069 423 8290, or send the details through the form, and you will be talking to someone who fixes these for a living rather than a call-centre script.
Four things help us bring the right parts: the brand, the screen size, roughly how old it is, and what it is doing. If you can find the model number on the sticker at the back, even better — that pins down the exact panel and supply variant, and it is the difference between a one-visit repair and a return trip.
You will be given a time window, not a vague day, and the technician calls before setting off. Across Menlo Park, Brooklyn, Hatfield, Waterkloof and Garsfontein that usually means same-day or next-day for the routine faults, and we will say plainly if a part needs ordering rather than pretending otherwise.
What to have ready. Clear access to the back of the set — if it is wall-mounted, mention that when booking so we bring the right tools and a second pair of hands. The remote, because a surprising number of "dead TV" call-outs are a remote or a source problem. And the original power cable if you have swapped it for a different one.
From there we take it: diagnose, quote, fix, test, hand over, warranty. You approve the number before anything happens, and it does not change afterwards.
If you need to move the appointment, a phone call is enough and there is no charge for rescheduling. We would far rather shift a booking than have a technician arrive to an empty house — which is also why we call before setting off rather than simply turning up in the window.
Fixed quotes, honest maths
We quote fixed for a reason. This trade has a reputation problem, and vague diagnostic fees that balloon once the case is open are where most of the horror stories start. Your new tv setup & installation quote in Pretoria is built from a real diagnosis of your actual set — the confirmed fault, the part it needs, the labour to fit it — and once you approve it, the number does not move.
It stands even if the repair takes longer than we thought. If the work runs over, that is our misjudgement to absorb. The whole point of a fixed price is that the risk of a wrong estimate sits with the person who made the estimate.
The one thing that will prompt a fresh conversation is a genuinely separate fault — a failing panel discovered behind a supply problem, say. That is a phone call to you, with a new number and a real choice about whether to proceed, before anything further is touched. It is never a line item you find on the invoice afterwards.
What is included. The diagnosis, the part, the labour, the testing, and the 12-month workmanship warranty. What is not. Anything you have not agreed to.
Payment is on completion, after the tested handover — not a deposit up front, not staged payments, and not before the set is working in front of you. It is structured like that for a reason: it keeps the incentive where it belongs.
Multiple sets in one place get quoted individually but visited once, which usually makes the labour work out better for you than three separate call-outs. Guesthouses, offices and sports bars tend to fall into this category, and it is worth mentioning up front so we allow the time.
Genuine vs compatible parts — the honest version
Genuine or compatible? The honest answer is that it depends on the part, and anyone giving you a blanket rule is selling something.
Where genuine matters. Mainboards, T-Con boards and anything carrying firmware or panel-specific timing. These are matched to the panel and the software, and a near-enough substitute produces subtle problems — wrong colour handling, missing features, HDCP failures on one input — that are miserable to chase afterwards. On these we specify genuine, or a verified pull from an identical model.
Where compatible is fine, and sometimes better. Power supply boards and backlight strips. A good equivalent supply board is frequently built with higher-rated capacitors than the original that just failed at five years old, which is precisely why it failed. Backlight strips need to match on length, LED count, voltage and colour temperature — get those right and there is no meaningful difference; get them wrong and you see it immediately as uneven brightness.
Where we simply refuse. Unbranded capacitors of unknown rating, mismatched strip sets, and anything recovered from a set that failed for a related reason. Those come back, and rightly so.
We tell you which you are getting, and why, before you approve anything. If you would rather have genuine on a part where we would normally fit an equivalent, that is your call — we will quote it either way.
Whatever goes in, you are told what it was. The invoice names the part and whether it was genuine, an equivalent or a verified pull, so there is a record if the question ever comes up. Repairers who will not tell you what they fitted are usually fitting something they would rather you did not look up.
We tell you when NOT to repair
We tell people not to repair their televisions fairly regularly, and it is worth explaining why a repair business would do that.
The simple version: a repair that was not worth doing generates an unhappy customer within a year, and unhappy customers are considerably more expensive than declined jobs. The better version: we would like to still be doing this in Pretoria in ten years, and that only works if the advice is honest when honesty is inconvenient.
When we will say don't. A panel failure on a mid-range set more than about five years old. Multiple simultaneous faults where the total approaches replacement cost. Water or lightning damage across several boards, where fixing one just reveals the next. Models where the essential part is genuinely unobtainable — a handful of discontinued models qualify.
What you get instead. A straight explanation of why, what an equivalent replacement would cost, and what to look for in a new set given how you actually use it. If there is anything worth salvaging — a working panel, a sound bar arrangement, a wall bracket that fits — we will say so.
You owe nothing for the advice. You are not charged for being told the truth, and you are not pressured towards a repair to justify the visit. It works the same regardless of the answer.
Second opinions are welcome, including on our own diagnosis. If another repairer has quoted you and the number feels wrong, bring us the details — we will tell you honestly if it looks fair, and we have talked people into accepting someone else's quote more than once. The diagnosis is free either way.
Local, accountable, reachable
Local, accountable, reachable — three words that mean something specific here rather than three words for a brochure.
Local means the technician who comes to you works Pretoria routinely and knows the area. It means we carry stock for Samsung, LG and Hisense LED sets across homes and offices because that is what people here own. And it means same-day turnaround is a normal expectation on routine faults rather than a marketing claim, because nobody is driving three hours to reach you.
Accountable means one business takes responsibility for the outcome. Not a lead-generation site that sells your details to whoever bids, not a franchise that disowns the operator when something goes wrong. If a repair we did fails, you phone us and we come back — there is nothing more to it.
Reachable means 069 423 8290 is answered by someone who can actually help, during working hours, without a menu tree. It also means that after a job you have a direct line to the person who did the work rather than a general enquiries address.
The test of all three is what happens when something goes wrong, which is precisely why we put the 12-month workmanship warranty in writing rather than implying it. On paper it is enforceable.
You will also hear from us when something changes. If a part is delayed, you get told before the day of the appointment rather than on it. That sounds like a small thing until you have taken a morning off work for a visit that was never going to happen.
After the repair
Honesty clause: electronics sometimes fail again, parts occasionally arrive faulty, and no repairer who claims otherwise should be trusted. What actually matters is what happens next.
Report it and it is triaged the same day. Phone 069 423 8290, tell us which repair it was, and you get an answer that day rather than a queue position. We keep the job history, so nobody has to reconstruct what was done from scratch.
If it is our workmanship, it is free. The specific fault we fixed recurring inside the 12-month window means the return visit and the fix are ours — no quibbling, no proportional charge, no argument about whether it is really the same fault. If we fitted a part that has failed, the same applies while the part's own cover runs.
If it is a different fault, we say so and quote it fresh. A set that develops an unrelated problem three months later has not had a failed repair; it has an ageing television with a second fault. You get a straight explanation of why the two are unconnected, a free diagnosis on the new one, and a fixed quote before anything is touched. No obligation, as ever.
That is all of it, and it is why the fine print on our quotes is short. A long warranty document is usually hiding something.
Response times, plainly: a warranty issue reported on a working day gets a same-day answer and a visit within the next couple of days in the areas we cover. If we cannot get to you quickly we will say so rather than book a slot we are going to move twice.
New TV Setup & Installation in Pretoria — common questions
What does the 12-month warranty cover?
The repair we performed: the part we fitted and the labour to fit it. If the specific fault we fixed comes back within the warranty period, we return and repair it free — one phone call, no forms. It doesn't cover a new, unrelated fault developing afterward, which we'd diagnose and quote separately.
Do you service Waterkloof, Garsfontein, Hatfield and Brooklyn?
Yes — Pretoria and its surrounds including Menlo Park, Brooklyn, Hatfield, Waterkloof and Garsfontein are part of our standing coverage, with Annelie du Toit in the area regularly. If you're just outside the listed suburbs, call 069 423 8290 anyway; listed areas are our patches, not our limits.
Which TV brands do you repair?
All major brands, including Samsung, LG and Hisense LED sets across homes and offices — we're not tied to any manufacturer, so the advice on repair vs replace is based on your specific TV, not on what we happen to stock. See our brand guides at /brands/ for what we know about each manufacturer's common fault patterns.
What information should I have ready when I call?
The brand and approximate screen size, roughly how old the TV is, and what it's actually doing (or not doing) — a black screen with sound still playing is a very different fault from a TV that's completely dead. A photo or short video sent on WhatsApp helps us prepare and often speeds up the diagnosis.
Can you fix a cracked or smashed screen?
Sometimes, and we'll give you an honest cost comparison before you commit. Screen panels are by far the most expensive single component in a TV, so on a large or older set, the repair cost can approach the price of an equivalent new TV — in which case we'll say so plainly. On smaller or newer sets, panel replacement is often genuinely worthwhile.
How much does new tv setup & installation cost in Pretoria?
It depends on the fault, the screen size and the panel type — which is why we diagnose first and quote fixed, per TV, rather than advertising a flat "from" price. Tell us the brand, size and symptom on 069 423 8290 and we'll give you a realistic estimate, then confirm the exact fixed price after the free diagnosis. The quote you approve is the invoice you receive.
My TV won't turn on at all — what's usually wrong?
In the large majority of cases, a failed power supply board or worn-out capacitors — one of the most common and most affordable TV repairs there is. A telltale sign is a faint click or pop when you try to switch it on. We test the board properly before quoting, since a small number of "won't turn on" cases are actually a mainboard fault instead.
How quickly can you repair my TV in Pretoria?
Most common faults — power boards, HDMI ports, sound, smart-platform issues — are repaired the same visit where we stock the part. Turnaround in Pretoria is typically same-day. Ordered parts, like screen panels, usually take a few working days once confirmed. If your TV is out for something urgent, say so when you call 069 423 8290 and we prioritise where we can.