There are two kinds of new tv setup & installation outfit in Polokwane. One quotes over the phone before seeing anything, orders the most likely part, and hopes. The other opens the set, measures, finds the actual fault, and quotes what it will cost to fix that. We're the second kind, and the whole shape of how we work follows from it.
A diagnosis here means the set gets its back off and a meter on it. Supply rails checked against spec under load, not at idle. Backlight strings driven individually so a single dead LED doesn't get mistaken for a failed driver. Panel ribbons and T-Con checked before anyone starts talking about a new screen — a fair number of "cracked panel" jobs turn out to be a loose or corroded connection, which is a fraction of the cost.
What you get back is a fixed number covering the confirmed fault, the part it needs and the labour to fit it. It doesn't drift once work starts. If we open the set and find a second, unrelated problem, that's a phone call to you before anything else happens — never a line item you discover on the invoice.
Work is warranted for 12-month on our labour, parts carry their own cover, and the set is tested properly before handover: an hour of real viewing, all inputs, sound at volume, the smart platform actually loaded. Call us when you're ready — 069 423 8290.
You are also welcome to keep the parts we remove. Some people want to see the bulged capacitors or the dead backlight strip, and that is entirely reasonable — it is the clearest possible evidence of what was actually wrong. Just say so when you approve the quote and they will be left with you.
Working in Polokwane, week in and week out
Polokwane has its own patterns, and after enough call-outs they stop being anecdotes and start being useful. The brand mix here leans towards Samsung and Hisense LED sets, which shapes what we carry: the supply boards and backlight strips for those models sit on the shelf rather than being ordered in, and that is the single biggest reason we can offer same or next day turnaround on the routine jobs.
Where you are in town changes things. Working across Bendor, Fauna Park, Ivy Park and Flora Park means a technician can usually reach you without the job becoming a half-day expedition, and it means the same person who diagnosed your set is the one who comes back to fit the part. You are not handed off to whoever happens to be free.
The seasonal rhythm is real as well. The first properly cold snap brings a wave of sets that will not wake from standby — capacitors that were marginal all summer finally give up when the electrolyte stiffens. Storm season brings surge damage, and the weeks after a long stretch of load shedding bring supply-board failures that had been quietly accumulating. None of it is mysterious once you have seen it a few hundred times.
What that adds up to is fewer surprises. When someone in Polokwane describes a symptom on the phone, there is usually a short list of likely causes and a fair idea of whether the part is in stock. That does not replace a proper diagnosis — we still measure before we quote — but it does mean the estimate you get up front is close to the number you end up paying.
Weekends and after-hours work are possible for jobs where a weekday visit genuinely does not fit, though the routine call-outs are easier to schedule during the week. If your only window is a Saturday morning, say so when you book rather than trying to make a weekday slot work and cancelling later.
Repair or replace — an honest local view
The repair-or-replace question comes up on most jobs in Polokwane, and it deserves a straighter answer than the industry usually gives it. Our rule of thumb is simple: if the repair costs more than roughly a third of what an equivalent new set would cost today, and the television is past about six years old, replacement is usually the better call. We will tell you when you are in that territory.
The panel is the usual dealbreaker. A cracked or failed panel on a mid-range set is frequently uneconomic — the panel is most of the manufacturing cost of the television, and fitting one is delicate work. On a large, recent, premium set the sums can still favour repair. On a five-year-old budget model they almost never do.
Almost everything else tends to favour repair, and by a wide margin. Supply boards, backlight strips, T-Con boards, HDMI ports, speaker amps, Wi-Fi modules, power buttons — these are components, not the whole product, and replacing one is a fraction of the price of a new television. A set repaired properly at this level generally runs on for years.
It is also worth saying: a repaired set is one less on the scrap heap. Televisions are heavy, awkward to recycle and full of material that should not end up in landfill. Where a repair is genuinely sensible, it is the better outcome on every measure — price, convenience and conscience.
Where replacement genuinely is the better call, we will take the old set away for proper recycling if you want it gone. Televisions are awkward to dispose of responsibly and heavy to move, and leaving one in a garage for two years is the usual alternative.
The faults we see most in Polokwane
Certain faults come round often enough in Polokwane that a technician can usually narrow things down from a decent description on the phone. These are the ones we see week in, week out.
- Dead set, standby light on or clicking. Almost always the power supply — bulging or dried-out capacitors on the primary side, or a protection circuit shutting the rail down because something downstream is drawing too much.
- Sound plays, screen stays black. Shine a torch at an angle on the dark screen: if you can see a faint image, the panel and mainboard are fine and the backlight has failed. That is a strip replacement, not a new screen.
- Picture with vertical or horizontal bands. Usually the T-Con board or its ribbon connections. Sometimes recoverable, sometimes panel-level — the diagnosis decides.
- Apps crash, Wi-Fi drops, remote lags. The smart module or its storage. Often repairable, and frequently mistaken for a set that is simply "too old".
- Wobbly or dead HDMI input. Port fatigue from years of plugging and unplugging. A re-soldered or replaced port is a cheap job that saves a whole television.
What these have in common is that none of them require a new set. They are component failures on a device that is otherwise sound, and the cost of putting them right is a fraction of replacement. The exception is genuine panel damage, which we will always tell you about honestly.
If your fault is not on this list, that is not unusual — describe the behaviour on 069 423 8290 and we will tell you what it points to.
Intermittent faults are the hardest to pin down, so anything you can tell us about the pattern helps enormously — whether it happens from cold, after an hour, only on one input, only after a power cut. A short video on your phone of the set misbehaving is genuinely useful and often saves a whole diagnostic visit.
What happens when you book
Booking is deliberately low-friction, because most people calling about a television are already mildly annoyed and do not want a process. Ring 069 423 8290, or send the details through the form, and you will be talking to someone who fixes these for a living rather than a call-centre script.
Four things help us bring the right parts: the brand, the screen size, roughly how old it is, and what it is doing. If you can find the model number on the sticker at the back, even better — that pins down the exact panel and supply variant, and it is the difference between a one-visit repair and a return trip.
You get an arrival window, and the technician calls before setting off. Across Bendor, Fauna Park, Ivy Park and Flora Park that usually means same-day or next-day for the routine faults, and we will say plainly if a part needs ordering rather than pretending otherwise.
What to have ready. Clear access to the back of the set — if it is wall-mounted, mention that when booking so we bring the right tools and a second pair of hands. The remote, because a surprising number of "dead TV" call-outs are a remote or a source problem. And the original power cable if you have swapped it for a different one.
From there we take it: diagnose, quote, fix, test, hand over, warranty. You approve the number before anything happens, and it does not change afterwards.
If you need to move the appointment, a phone call is enough and there is no charge for rescheduling. We would far rather shift a booking than have a technician arrive to an empty house — which is also why we call before setting off rather than simply turning up in the window.
Fixed quotes, honest maths
We quote fixed for a reason. This trade has a reputation problem, and vague diagnostic fees that balloon once the case is open are where most of the horror stories start. Your new tv setup & installation quote in Polokwane is built from a real diagnosis of your actual set — the confirmed fault, the part it needs, the labour to fit it — and once you approve it, the number does not move.
It stands even if the repair takes longer than we thought. If the work runs over, that is our misjudgement to absorb. The whole point of a fixed price is that the risk of a wrong estimate sits with the person who made the estimate.
The one thing that will prompt a fresh conversation is a genuinely separate fault — a failing panel discovered behind a supply problem, say. That is a phone call to you, with a new number and a real choice about whether to proceed, before anything further is touched. It is never a line item you find on the invoice afterwards.
What is included. The diagnosis, the part, the labour, the testing, and the 12-month workmanship warranty. What is not. Anything you have not agreed to.
Payment is on completion, after the tested handover — not a deposit up front, not staged payments, and not before the set is working in front of you. We do it that way on purpose: it keeps the incentive where it belongs.
Multiple sets in one place get quoted individually but visited once, which usually makes the labour work out better for you than three separate call-outs. Guesthouses, offices and sports bars tend to fall into this category, and it is worth mentioning up front so we allow the time.
Genuine vs compatible parts — the honest version
Genuine or compatible? The honest answer is that it depends on the part, and anyone giving you a blanket rule is selling something.
Where genuine matters. Mainboards, T-Con boards and anything carrying firmware or panel-specific timing. These are matched to the panel and the software, and a near-enough substitute produces subtle problems — wrong colour handling, missing features, HDCP failures on one input — that are miserable to chase afterwards. On these we specify genuine, or a verified pull from an identical model.
Where compatible is fine, and sometimes better. Power supply boards and backlight strips. A good equivalent supply board is frequently built with higher-rated capacitors than the original that just failed at five years old, which is precisely why it failed. Backlight strips need to match on length, LED count, voltage and colour temperature — get those right and there is no meaningful difference; get them wrong and you see it immediately as uneven brightness.
Where we simply refuse. Unbranded capacitors of unknown rating, mismatched strip sets, and anything recovered from a set that failed for a related reason. That is a warranty claim waiting to happen.
The quote says which route we are taking, and why, before you approve anything. If you would rather have genuine on a part where we would normally fit an equivalent, that is your call — we will price both.
Whatever goes in, you are told what it was. The invoice names the part and whether it was genuine, an equivalent or a verified pull, so there is a record if the question ever comes up. Repairers who will not tell you what they fitted are usually fitting something they would rather you did not look up.
Tested like it matters — because it does
A television that switches on is not a television that has been tested. The gap between those two things is where most repeat call-outs live, and closing it is the least glamorous and most important part of the job.
What a proper handover test involves. The set runs for a meaningful stretch — long enough for the supply to reach working temperature, because a marginal component that behaves cold will often misbehave warm. Every input gets checked, not just the one that happened to be selected. Sound is run up to real volume, since amplifier faults hide at low levels. The smart platform is loaded, connected to Wi-Fi and signed in, because "the TV works but the apps don't" is not a fixed television.
Why heat matters so much. Thermal cycling is what kills electronics, and it is also what exposes a weak repair. A joint that reflows badly, an under-rated capacitor, a heatsink pad that was not replaced — these all pass a thirty-second test and fail a thirty-minute one. The longer test is the one that counts.
What you should check before we leave. Put on whatever you normally watch, on whatever input you normally use, and look at it properly. If something is off — colour, a click, a dim edge — say so while the technician is still in the room. Far easier then than next week.
If the set fails its own handover test, it does not leave as finished. That occasionally means a second visit or a part reordered, and it occasionally means telling you that the repair has revealed something worse. Neither is a comfortable conversation, but both are better than a television that fails again the week after we have been paid.
We tell you when NOT to repair
We tell people not to repair their televisions fairly regularly, and it is worth explaining why a repair business would do that.
The simple version: a repair that was not worth doing generates an unhappy customer within a year, and unhappy customers are considerably more expensive than declined jobs. The better version: we would like to still be doing this in Polokwane in ten years, and that only works if the advice is honest when honesty is inconvenient.
When we will say don't. A panel failure on a mid-range set more than about five years old. Multiple simultaneous faults where the total approaches replacement cost. Water or lightning damage across several boards, where fixing one just reveals the next. Models where the essential part is genuinely unobtainable — certain older and imported sets land in this category.
What you get instead. A straight explanation of why, what an equivalent replacement would cost, and what to look for in a new set given how you actually use it. If there is anything worth salvaging — a working panel, a sound bar arrangement, a wall bracket that fits — we will say so.
You owe nothing for the advice. You are not charged for being told the truth, and you are not pressured towards a repair to justify the visit. It works the same regardless of the answer.
Second opinions are welcome, including on our own diagnosis. If another repairer has quoted you and the number feels wrong, bring us the details — we will tell you honestly if it looks fair, and we have talked people into accepting someone else's quote more than once. The diagnosis is free either way.
Our guarantee to Polokwane
Our guarantee to Polokwane is short enough to read and specific enough to hold us to, which is the only kind worth having.
The diagnosis is free. Whether or not you proceed, and regardless of what we find. There is no call-out fee that materialises afterwards and no diagnostic charge folded quietly into the invoice. If you decide against the repair, you owe nothing and you still leave knowing what is wrong with your set.
The quote is fixed. You approve a number before anything is ordered or opened, and that number is what you pay. If the job turns out harder than we judged, that is ours to absorb. A genuinely separate fault means a phone call and a fresh decision — never a surprise on the bill.
The work is warranted for 12-month. On our workmanship: the fault we fixed, staying fixed. Parts carry their own manufacturer cover in addition. Report a problem with a repair we did and it is triaged the same day.
You pay on completion. After the tested handover, with the set working in front of you. No deposit, no staged payments.
We will tell you not to repair it when that is the honest answer, with the reasoning and a view on what to buy instead.
That is the whole of it — which is why the fine print on our quotes runs to about four lines.
The warranty stays with the set rather than with you, so if you sell the television inside the cover period the new owner inherits what remains. Hand over the invoice with it. That is unusual in this trade and it costs us very little, because a repair done properly does not come back.
New TV Setup & Installation in Polokwane — common questions
Do you repair TVs you didn't sell or previously service?
All the time — most of our Polokwane work is TVs bought from a retailer, not from us. We diagnose with proper test equipment, quote the fix fixed, and repair every major brand. You don't need any prior relationship with us to get a fair diagnosis and quote.
How much does new tv setup & installation cost in Polokwane?
It depends on the fault, the screen size and the panel type — which is why we diagnose first and quote fixed, per TV, rather than advertising a flat "from" price. Tell us the brand, size and symptom on 069 423 8290 and we'll give you a realistic estimate, then confirm the exact fixed price after the free diagnosis. The quote you approve is the invoice you receive.
My TV won't turn on at all — what's usually wrong?
In the large majority of cases, a failed power supply board or worn-out capacitors — one of the most common and most affordable TV repairs there is. A telltale sign is a faint click or pop when you try to switch it on. We test the board properly before quoting, since a small number of "won't turn on" cases are actually a mainboard fault instead.
Do you offer on-site repairs, or do I need to bring the TV in?
Both — whichever suits you and the fault. Many faults (power boards, HDMI ports, sound issues, software faults) can be diagnosed and often fixed on-site. Screen replacements and some mainboard repairs are usually better handled at the workshop, and we can collect and deliver if that's easier for you. We'll recommend the right option once we know the symptom.
Do you service Flora Park, Fauna Park, Ivy Park and Bendor?
Yes — Polokwane and its surrounds including Bendor, Fauna Park, Ivy Park and Flora Park are part of our standing coverage, with Pieter Jacobs in the area regularly. If you're just outside the listed suburbs, call 069 423 8290 anyway; listed areas are our patches, not our limits.
Which TV brands do you repair?
All major brands, including Samsung and Hisense LED sets — we're not tied to any manufacturer, so the advice on repair vs replace is based on your specific TV, not on what we happen to stock. See our brand guides at /brands/ for what we know about each manufacturer's common fault patterns.
What information should I have ready when I call?
The brand and approximate screen size, roughly how old the TV is, and what it's actually doing (or not doing) — a black screen with sound still playing is a very different fault from a TV that's completely dead. A photo or short video sent on WhatsApp helps us prepare and often speeds up the diagnosis.
My smart TV apps keep crashing or Wi-Fi won't connect — is that a hardware fault?
Usually not. Most smart-platform faults — crashing apps, frozen menus, Wi-Fi that won't hold — are software issues: full storage, corrupted app data or outdated firmware. We try the free software fixes first (cache clearing, firmware updates, a careful factory reset) before treating it as a hardware fault.