There are two kinds of tv health check outfit in Pretoria. One quotes over the phone before seeing anything, orders the most likely part, and hopes. The other opens the set, measures, finds the actual fault, and quotes what it will cost to fix that. We're the second kind, and the whole shape of how we work follows from it.
A diagnosis here means the set gets its back off and a meter on it. Supply rails checked against spec under load, not at idle. Backlight strings driven individually so a single dead LED doesn't get mistaken for a failed driver. Panel ribbons and T-Con checked before anyone starts talking about a new screen — a fair number of "cracked panel" jobs turn out to be a loose or corroded connection, which is a fraction of the cost.
You get a fixed price, not a range covering the confirmed fault, the part it needs and the labour to fit it. It doesn't drift once work starts. If we open the set and find a second, unrelated problem, that's a phone call to you before anything else happens — never a line item you discover on the invoice.
Work is warranted for 12-month on our labour, parts carry their own cover, and the set is tested properly before handover: an hour of real viewing, all inputs, sound at volume, the smart platform actually loaded. One number gets you a technician — 069 423 8290.
You are also welcome to keep the parts we remove. Some people want to see the bulged capacitors or the dead backlight strip, and that is entirely reasonable — it is the clearest possible evidence of what was actually wrong. Just say so when you approve the quote and they will be left with you.
From Menlyn Park to your lounge
From Menlyn Park to your lounge is a shorter trip than most people assume, and it changes what a repair actually costs you in time. We work this area properly rather than treating it as an outlying zone to be visited when enough jobs stack up, which is why a call in the morning usually means a technician the same day or the next.
That coverage runs across Menlo Park, Brooklyn, Hatfield, Waterkloof and Garsfontein, and the practical benefit is not just speed. It means the set often does not need to leave the house at all. A supply board, a backlight strip, an HDMI port, a failing power button assembly — these are on-site jobs when the technician arrives with the right stock, and a set that never gets moved is a set that never gets damaged in transit or lost in a workshop queue.
Where a job genuinely needs the bench — panel work, board-level soldering, anything needing a controlled environment — we collect, log the set in properly, and give you a realistic date rather than an optimistic one. You get told which category your repair falls into at the point of quoting, not discovered halfway through.
A word on getting to you: if the set is wall-mounted, tell us when you book. Bringing the right bracket tools and a second pair of hands is the difference between a clean job and a scratched wall. Same goes for anything above a fireplace or in a ceiling mount — we would rather plan for it.
If the television is in a flat, complex or estate with access control, let us know the arrangements when you book. Getting stuck at a boom gate is the single most common reason a scheduled visit runs late, and a name left at the gate solves it entirely.
Working in Pretoria, week in and week out
Pretoria has its own patterns, and after enough call-outs they stop being anecdotes and start being useful. The brand mix here leans towards Samsung, LG and Hisense LED sets across homes and offices, which shapes what we carry: the supply boards and backlight strips for those models sit on the shelf rather than being ordered in, and that is the single biggest reason we can offer same-day turnaround on the routine jobs.
Geography matters more than people expect. Working across Menlo Park, Brooklyn, Hatfield, Waterkloof and Garsfontein means a technician can usually reach you without the job becoming a half-day expedition, and it means the same person who diagnosed your set is the one who comes back to fit the part. You are not handed off to whoever happens to be free.
The seasonal rhythm is real as well. The first properly cold snap brings a wave of sets that will not wake from standby — capacitors that were marginal all summer finally give up when the electrolyte stiffens. Storm season brings surge damage, and the weeks after a long stretch of load shedding bring supply-board failures that had been quietly accumulating. None of it is mysterious once you have seen it a few hundred times.
In practice it means we guess less. When someone in Pretoria describes a symptom on the phone, there is usually a short list of likely causes and a fair idea of whether the part is in stock. That does not replace a proper diagnosis — we still measure before we quote — but it does mean the estimate you get up front is close to the number you end up paying.
Weekends and after-hours work are possible for jobs where a weekday visit genuinely does not fit, though the routine call-outs are easier to schedule during the week. If your only window is a Saturday morning, say so when you book rather than trying to make a weekday slot work and cancelling later.
Problems worth fixing before they get worse
Some faults are worth attending to before they become the expensive version of themselves. Televisions rarely fail without warning — they usually spend weeks or months telling you something is wrong, and the cost of listening early is a lot lower than the cost of waiting.
Slow or reluctant start-up. A set that used to wake instantly and now takes several seconds, or several attempts, is showing you a supply that is losing capacity. Caught early it is a capacitor job. Left alone it becomes a board replacement, and sometimes takes other things with it when it finally goes.
Flickering or uneven brightness. Backlight strings degrade one LED at a time. Early on you get a slight shimmer or a dim patch at one edge; later the driver goes into protection and the screen goes black entirely. Replacing strips before the driver is stressed is the cheaper path.
Intermittent sound or crackle at volume. Usually the amplifier section or a failing speaker. Cheap to address, and worth doing before a failing output stage damages the speakers themselves.
Heat and smell. A television that runs noticeably hot, or has any burnt-electronics smell, should be unplugged and looked at. Do not sit on that symptom.
This is not an upsell — plenty of sets run for years with a minor quirk and never get worse. But if you have noticed a change and it has been getting slowly worse, the diagnosis is free and the information is useful either way. 069 423 8290.
One thing to avoid: opening the set yourself. The supply holds a serious charge long after it is unplugged, the panel is easily cracked by uneven pressure on the bezel, and a set that has been opened is harder for anyone to warrant afterwards. If it is already open, tell us — that is not a problem, we would just rather know.
What happens when you book
Booking is deliberately low-friction, because most people calling about a television are already mildly annoyed and do not want a process. Ring 069 423 8290, or send the details through the form, and you will be talking to someone who fixes these for a living rather than a call-centre script.
Four things help us bring the right parts: the brand, the screen size, roughly how old it is, and what it is doing. If you can find the model number on the sticker at the back, even better — that pins down the exact panel and supply variant, and it is the difference between a one-visit repair and a return trip.
You get an arrival window, and the technician calls before setting off. Across Menlo Park, Brooklyn, Hatfield, Waterkloof and Garsfontein that usually means same-day or next-day for the routine faults, and we will say plainly if a part needs ordering rather than pretending otherwise.
What to have ready. Clear access to the back of the set — if it is wall-mounted, mention that when booking so we bring the right tools and a second pair of hands. The remote, because a surprising number of "dead TV" call-outs are a remote or a source problem. And the original power cable if you have swapped it for a different one.
From there we take it: diagnose, quote, fix, test, hand over, warranty. You approve the number before anything happens, and it does not change afterwards.
If you need to move the appointment, a phone call is enough and there is no charge for rescheduling. We would far rather shift a booking than have a technician arrive to an empty house — which is also why we call before setting off rather than simply turning up in the window.
Fixed quotes, honest maths
We quote fixed for a reason. This trade has a reputation problem, and vague diagnostic fees that balloon once the case is open are where most of the horror stories start. Your tv health check quote in Pretoria is built from a real diagnosis of your actual set — the confirmed fault, the part it needs, the labour to fit it — and once you approve it, the number does not move.
That holds even when we get it wrong. If the work runs over, that is our misjudgement to absorb. The whole point of a fixed price is that the risk of a wrong estimate sits with the person who made the estimate.
The one thing that will prompt a fresh conversation is a genuinely separate fault — a failing panel discovered behind a supply problem, say. That is a phone call to you, with a new number and a real choice about whether to proceed, before anything further is touched. It is never a line item you find on the invoice afterwards.
What is included. The diagnosis, the part, the labour, the testing, and the 12-month workmanship warranty. What is not. Anything you have not agreed to.
Payment is on completion, after the tested handover — not a deposit up front, not staged payments, and not before the set is working in front of you. It is structured like that for a reason: it keeps the incentive where it belongs.
Multiple sets in one place get quoted individually but visited once, which usually makes the labour work out better for you than three separate call-outs. Guesthouses, offices and sports bars tend to fall into this category, and it is worth mentioning up front so we allow the time.
Genuine vs compatible parts — the honest version
Genuine or compatible? The honest answer is that it depends on the part, and anyone giving you a blanket rule is selling something.
Where genuine matters. Mainboards, T-Con boards and anything carrying firmware or panel-specific timing. These are matched to the panel and the software, and a near-enough substitute produces subtle problems — wrong colour handling, missing features, HDCP failures on one input — that are miserable to chase afterwards. On these we specify genuine, or a verified pull from an identical model.
Where compatible is fine, and sometimes better. Power supply boards and backlight strips. A good equivalent supply board is frequently built with higher-rated capacitors than the original that just failed at five years old, which is precisely why it failed. Backlight strips need to match on length, LED count, voltage and colour temperature — get those right and there is no meaningful difference; get them wrong and you see it immediately as uneven brightness.
Where we simply refuse. Unbranded capacitors of unknown rating, mismatched strip sets, and anything recovered from a set that failed for a related reason. That is a warranty claim waiting to happen.
We tell you which you are getting, and why, before you approve anything. If you would rather have genuine on a part where we would normally fit an equivalent, that is your call — we will price both.
Whatever goes in, you are told what it was. The invoice names the part and whether it was genuine, an equivalent or a verified pull, so there is a record if the question ever comes up. Repairers who will not tell you what they fitted are usually fitting something they would rather you did not look up.
Tested like it matters — because it does
A television that switches on is not a television that has been tested. The gap between those two things is where most repeat call-outs live, and closing it is the least glamorous and most important part of the job.
What a proper handover test involves. The set runs for a meaningful stretch — long enough for the supply to reach working temperature, because a marginal component that behaves cold will often misbehave warm. Every input gets checked, not just the one that happened to be selected. Sound is run up to real volume, since amplifier faults hide at low levels. The smart platform is loaded, connected to Wi-Fi and signed in, because "the TV works but the apps don't" is not a fixed television.
Why heat matters so much. Thermal cycling is what kills electronics, and it is also what exposes a weak repair. A joint that reflows badly, an under-rated capacitor, a heatsink pad that was not replaced — these all pass a thirty-second test and fail a thirty-minute one. So we do the thirty-minute one.
What you should check before we leave. Put on whatever you normally watch, on whatever input you normally use, and look at it properly. If something is off — colour, a click, a dim edge — say so while the technician is still in the room. Far easier then than next week.
If the set fails its own handover test, it does not leave as finished. That occasionally means a second visit or a part reordered, and it occasionally means telling you that the repair has revealed something worse. Neither is a comfortable conversation, but both are better than a television that fails again the week after we have been paid.
Local, accountable, reachable
Local, accountable, reachable — three words that mean something specific here rather than three words for a brochure.
Local means the technician who comes to you works Pretoria routinely and knows the area. It means we carry stock for Samsung, LG and Hisense LED sets across homes and offices because that is what people here own. And it means same-day turnaround is a normal expectation on routine faults rather than a marketing claim, because nobody is driving three hours to reach you.
Accountable means one business takes responsibility for the outcome. Not a lead-generation site that sells your details to whoever bids, not a franchise that disowns the operator when something goes wrong. If a repair we did fails, you phone us and we come back — there is nothing more to it.
Reachable means 069 423 8290 is answered by someone who can actually help, during working hours, without a menu tree. It also means that after a job you have a direct line to the person who did the work rather than a general enquiries address.
The test of all three is what happens when something goes wrong, which is precisely why we put the 12-month workmanship warranty in writing rather than implying it. On paper it is enforceable.
You will also hear from us when something changes. If a part is delayed, you get told before the day of the appointment rather than on it. That sounds like a small thing until you have taken a morning off work for a visit that was never going to happen.
If something goes wrong
Warranties are easy to advertise and awkward to honour, so it is worth setting out exactly what ours covers, what it does not, and how to use it — before you need it rather than after.
What is covered. Our workmanship for 12-month from the date of handover. If the fault we repaired comes back, we return and put it right at no charge, including the call-out. Parts we supply carry their manufacturer's cover on top of that, and we handle the claim rather than sending you to do it.
What is not. New and unrelated faults, which are quoted fresh. Physical damage after the repair — a knock, a dropped remote through the screen, a spill. Damage from a surge or lightning strike after handover, which is an insurance matter rather than a workmanship one. Plus anything opened up elsewhere afterwards, which we cannot reasonably stand behind.
How to claim. Phone 069 423 8290 with the job details. There is no form and no portal. We keep the record of what was done and which parts went in, so the conversation starts from what we already know rather than from your description of a repair you did not perform.
Worth doing: keep the invoice. Not because we will refuse without it, but because it has the model, the parts and the date on it, and that makes any future conversation about the set faster for everybody.
We keep the job record on our side regardless — model, fault, parts, dates and who did the work. So even if the invoice has long since disappeared into a drawer, a phone call with your address and rough date is usually enough for us to find the job and pick up the conversation from there.
TV Health Check in Pretoria — common questions
My TV won't turn on at all — what's usually wrong?
In the large majority of cases, a failed power supply board or worn-out capacitors — one of the most common and most affordable TV repairs there is. A telltale sign is a faint click or pop when you try to switch it on. We test the board properly before quoting, since a small number of "won't turn on" cases are actually a mainboard fault instead.
Do you service Waterkloof, Garsfontein, Hatfield and Brooklyn?
Yes — Pretoria and its surrounds including Menlo Park, Brooklyn, Hatfield, Waterkloof and Garsfontein are part of our standing coverage, with Annelie du Toit in the area regularly. If you're just outside the listed suburbs, call 069 423 8290 anyway; listed areas are our patches, not our limits.
Is my TV worth repairing, or should I just buy a new one?
It depends on the fault, the TV's age and its size — and we'll tell you honestly rather than quote every job regardless. Common faults (power boards, backlights, HDMI ports, sound, smart-platform issues) are almost always worth repairing on sets under about six years old. Large cracked panels on older sets are the main case where replacement can be the better value, and we'll say so plainly during the free diagnosis.
My smart TV apps keep crashing or Wi-Fi won't connect — is that a hardware fault?
Usually not. Most smart-platform faults — crashing apps, frozen menus, Wi-Fi that won't hold — are software issues: full storage, corrupted app data or outdated firmware. We try the free software fixes first (cache clearing, firmware updates, a careful factory reset) before treating it as a hardware fault.
Do you offer on-site repairs, or do I need to bring the TV in?
Both — whichever suits you and the fault. Many faults (power boards, HDMI ports, sound issues, software faults) can be diagnosed and often fixed on-site. Screen replacements and some mainboard repairs are usually better handled at the workshop, and we can collect and deliver if that's easier for you. We'll recommend the right option once we know the symptom.
What information should I have ready when I call?
The brand and approximate screen size, roughly how old the TV is, and what it's actually doing (or not doing) — a black screen with sound still playing is a very different fault from a TV that's completely dead. A photo or short video sent on WhatsApp helps us prepare and often speeds up the diagnosis.
What does the 12-month warranty cover?
The repair we performed: the part we fitted and the labour to fit it. If the specific fault we fixed comes back within the warranty period, we return and repair it free — one phone call, no forms. It doesn't cover a new, unrelated fault developing afterward, which we'd diagnose and quote separately.
How much does tv health check cost in Pretoria?
It depends on the fault, the screen size and the panel type — which is why we diagnose first and quote fixed, per TV, rather than advertising a flat "from" price. Tell us the brand, size and symptom on 069 423 8290 and we'll give you a realistic estimate, then confirm the exact fixed price after the free diagnosis. The quote you approve is the invoice you receive.