There are two kinds of tv health check outfit in Durban. One quotes over the phone before seeing anything, orders the most likely part, and hopes. The other opens the set, measures, finds the actual fault, and quotes what it will cost to fix that. We're the second kind, and the whole shape of how we work follows from it.
A diagnosis here means the set gets its back off and a meter on it. Supply rails checked against spec under load, not at idle. Backlight strings driven individually so a single dead LED doesn't get mistaken for a failed driver. Panel ribbons and T-Con checked before anyone starts talking about a new screen — a fair number of "cracked panel" jobs turn out to be a loose or corroded connection, which is a fraction of the cost.
You get a fixed price, not a range covering the confirmed fault, the part it needs and the labour to fit it. It doesn't drift once work starts. If we open the set and find a second, unrelated problem, that's a phone call to you before anything else happens — never a line item you discover on the invoice.
Work is warranted for 12-month on our labour, parts carry their own cover, and the set is tested properly before handover: an hour of real viewing, all inputs, sound at volume, the smart platform actually loaded. Start with a call — 069 423 8290.
You are also welcome to keep the parts we remove. Some people want to see the bulged capacitors or the dead backlight strip, and that is entirely reasonable — it is the clearest possible evidence of what was actually wrong. Just say so when you approve the quote and they will be left with you.
Repair or replace — an honest local view
The repair-or-replace question comes up on most jobs in Durban, and it deserves a straighter answer than the industry usually gives it. Our rule of thumb is simple: if the repair costs more than roughly a third of what an equivalent new set would cost today, and the television is past about six years old, replacement is usually the better call. We will tell you when you are in that territory.
The panel is the usual dealbreaker. A cracked or failed panel on a mid-range set is frequently uneconomic — the panel is most of the manufacturing cost of the television, and fitting one is delicate work. On a large, recent, premium set the sums can still favour repair. On a five-year-old budget model they almost never do.
Almost everything else tends to favour repair, and by a wide margin. Supply boards, backlight strips, T-Con boards, HDMI ports, speaker amps, Wi-Fi modules, power buttons — these are components, not the whole product, and replacing one is a fraction of the price of a new television. A set repaired properly at this level generally runs on for years.
The waste angle matters as well. Televisions are heavy, awkward to recycle and full of material that should not end up in landfill. Where a repair is genuinely sensible, it is the better outcome on every measure — price, convenience and conscience.
Where replacement genuinely is the better call, we will take the old set away for proper recycling if you want it gone. Televisions are awkward to dispose of responsibly and heavy to move, and leaving one in a garage for two years is the usual alternative.
Power surges and load shedding — the quiet TV killer
If there is one thing that kills televisions in KwaZulu-Natal faster than anything else, it is the electricity supply. Load shedding is not simply an inconvenience for a TV — it is a repeated, violent cycle of power loss and restoration, and the moment of restoration is where the damage happens. The surge that arrives when the grid comes back is short, sharp and entirely capable of taking out a supply board that would otherwise have run for another decade.
The damage is usually cumulative rather than instant. Electrolytic capacitors on the primary side lose capacity a little at a time, the set starts taking longer to come out of standby, then one day it clicks and does nothing. By that point the repair is a supply board rebuild rather than a single component, which is why the early symptoms are worth acting on.
What actually protects a set: a decent surge-protected multiplug is the bare minimum and costs less than a takeaway. Better is a UPS or inverter feeding the entertainment unit, which removes the hard power cut entirely. Best, if you are already running an inverter, is making sure the TV is on the protected circuit rather than an unprotected wall socket two metres away — we see that mistake constantly.
The old advice about storms still holds. Direct strikes and nearby induced surges are a different order of magnitude, and no consumer-grade protector is going to absorb one. If a set has taken a hit, tell the technician — it changes what gets checked first.
If the damage was clearly caused by a surge or a strike, ask us for a written assessment. Most household policies cover lightning and power-surge damage to electronics, and a proper technician's report describing the specific components that failed is usually what an insurer needs. It costs you nothing to have it written up.
The faults we see most in Durban
Certain faults come round often enough in Durban that a technician can usually narrow things down from a decent description on the phone. These are the ones we see week in, week out.
- Dead set, standby light on or clicking. Almost always the power supply — bulging or dried-out capacitors on the primary side, or a protection circuit shutting the rail down because something downstream is drawing too much.
- Sound plays, screen stays black. Shine a torch at an angle on the dark screen: if you can see a faint image, the panel and mainboard are fine and the backlight has failed. That is a strip replacement, not a new screen.
- Picture with vertical or horizontal bands. Usually the T-Con board or its ribbon connections. Sometimes recoverable, sometimes panel-level — the diagnosis decides.
- Apps crash, Wi-Fi drops, remote lags. The smart module or its storage. Often repairable, and frequently mistaken for a set that is simply "too old".
- Wobbly or dead HDMI input. Port fatigue from years of plugging and unplugging. A re-soldered or replaced port is a cheap job that saves a whole television.
The useful thing here is that none of them require a new set. They are component failures on a device that is otherwise sound, and the cost of putting them right is a fraction of replacement. The exception is genuine panel damage, which we will always tell you about honestly.
If your fault is not on this list, that is not unusual — describe the behaviour on 069 423 8290 and we will tell you what it points to.
Intermittent faults are the hardest to pin down, so anything you can tell us about the pattern helps enormously — whether it happens from cold, after an hour, only on one input, only after a power cut. A short video on your phone of the set misbehaving is genuinely useful and often saves a whole diagnostic visit.
Repairs: diagnose first, quote second, fix fast
Diagnose first, quote second, fix fast — in that order, without exception. It sounds obvious. It is also the thing that separates a repair you are happy with from the horror stories people bring us after someone else has already had a go.
Why diagnosis comes first. The same symptom has several possible causes at wildly different prices. A phone quote is therefore either a guess padded for the worst case, or a low number that grows once work starts. Neither is fair. Measuring first costs us time and costs you nothing, and it means the number you are given is the number you pay.
Why the quote is fixed. Because a variable quote transfers all the risk of a wrong diagnosis onto you. If we misjudge the job, that is our problem to absorb, not yours to fund. That single arrangement does more for trust than any amount of marketing.
Why speed comes last. Fast is good, but fast is a consequence of the first two steps rather than a goal in itself. Carrying the right stock for the brands common in Durban, and knowing what the fault is before arriving, is what produces same-day turnaround on routine work. Rushing the diagnosis to look quick just produces return visits.
If something needs ordering, we give you an honest date — including when that date is inconvenient. Better an awkward truth up front.
Realistic timings on parts: common supply boards and backlight strips for the brands we see most are usually in stock. Model-specific mainboards and T-Con boards typically take a few working days. Anything for a discontinued or grey-import model can take longer or prove unobtainable, and you will be told which of those you are in at the point of quoting.
Where the money goes — and where not to cut corners
It is worth knowing where the money in a repair actually goes, if only so you can tell a fair quote from a padded one. Three things make up almost any invoice: the part, the labour to fit it, and the time spent working out which part it needed in the first place.
The part. Genuine manufacturer boards carry a premium and are not always available for older models. Quality equivalents are frequently the better buy, and occasionally the better part — some aftermarket supply boards use better-rated capacitors than the originals that failed. What matters is the specification, not the branding on the box.
The labour. Fitting a supply board is quick. Rebuilding one at component level is not. Replacing backlight strips means the panel comes off the frame — delicate, slow, and the step where an inexperienced hand turns a repair into a write-off. You are paying for the second kind of care, and it is the part worth paying for.
Where not to cut corners. Under-rated capacitors that fail again in a year. Mismatched backlight strips that give uneven brightness and stress the driver. Skipping the thermal paste and pads on a mainboard swap. Each one is a false economy.
Where saving money is sensible: a quality equivalent part over genuine, on a set that does not warrant the premium. We will tell you which is which, and price both if you want the choice.
If you need the quote in writing for an insurer or a landlord, we will provide it in a form that is actually usable — the fault described properly, the parts itemised, the labour separated out. A one-line figure scribbled on a receipt tends to get sent back, and that wastes a fortnight.
The brands we repair in Durban — and how we source parts
The brands we see most in Durban are Samsung, LG and Hisense sets across the metro, and that shapes what travels in the van. Stocking the common supply boards, backlight strips and connectors for the sets people here actually own is the unglamorous reason routine repairs finish in one visit instead of three.
Samsung and LG dominate the installed base and are generally good to work on — parts availability is decent, service documentation exists, and the common failure points are well understood. LG's OLED range needs a different approach again, and we will be straight about which OLED faults are economically repairable and which are not.
Hisense, TCL and Skyworth have taken a large share of the mid-market, and they fail in predictable ways — supply-side capacitors and backlight drivers, mostly. Parts are available, repairs are usually economic, and these are frequently the sets people assume are disposable when they are not.
Sony, Philips, Panasonic and Sharp turn up less often but are perfectly serviceable. Older Sony and Panasonic panels in particular are worth keeping alive — the build quality justifies a repair that would not make sense on a budget set of the same age.
What we will not do is pretend a brand is unfixable to avoid the work. If a part is genuinely unobtainable — and on some older or grey-import models it is — you will be told that plainly, along with what your options actually are, rather than being strung along while we try.
OLED and QLED sets deserve a specific note. QLED is an LED set with a quantum-dot layer, so it fails and repairs much like any other LED television. OLED is genuinely different — panel-level faults such as burn-in are not economically repairable, though supply, board and connectivity faults on an OLED are as fixable as on anything else.
Tested like it matters — because it does
A television that switches on is not a television that has been tested. The gap between those two things is where most repeat call-outs live, and closing it is the least glamorous and most important part of the job.
What a proper handover test involves. The set runs for a meaningful stretch — long enough for the supply to reach working temperature, because a marginal component that behaves cold will often misbehave warm. Every input gets checked, not just the one that happened to be selected. Sound is run up to real volume, since amplifier faults hide at low levels. The smart platform is loaded, connected to Wi-Fi and signed in, because "the TV works but the apps don't" is not a fixed television.
Why heat matters so much. Thermal cycling is what kills electronics, and it is also what exposes a weak repair. A joint that reflows badly, an under-rated capacitor, a heatsink pad that was not replaced — these all pass a thirty-second test and fail a thirty-minute one. So we do the thirty-minute one.
What you should check before we leave. Put on whatever you normally watch, on whatever input you normally use, and look at it properly. If something is off — colour, a click, a dim edge — say so while the technician is still in the room. Better now than a return trip.
If the set fails its own handover test, it does not leave as finished. That occasionally means a second visit or a part reordered, and it occasionally means telling you that the repair has revealed something worse. Neither is a comfortable conversation, but both are better than a television that fails again the week after we have been paid.
Why Durban chooses us
There is no shortage of people in Durban who will collect your television and return it eventually. The reasons customers here stay with us are mundane rather than dramatic, which is rather the point.
The diagnosis is free and it is real. Not a glance and a guess — a meter on the rails, backlight strings driven individually, connections checked before anything is condemned. You get told what is actually wrong, whether or not you go ahead with us.
The quote is fixed before work starts. You approve a number, and that is the number. No diagnostic fee that appears regardless, no discovery halfway through that the job is suddenly larger.
Most repairs happen in your house. Working across Berea, Morningside, Glenwood, Umbilo and Musgrave with the right stock on board means the set usually never leaves — no transit damage, no workshop queue, no fortnight without a television.
The same technician sees it through. Nomvula Khumalo and the team diagnose and return to fit, so nobody re-learns your set from scratch and nothing gets lost between people.
We say when not to repair. If replacement is the better buy, that is what you will hear, with the reasoning. A declined job costs us less than a bad reputation.
None of that is remarkable — it is just what a competent trade should look like. It is apparently rarer than it should be.
Business and trade customers get the same terms with a bit more structure: consolidated invoicing, scheduled visits around trading hours, and a single point of contact rather than a new conversation each time. Guesthouses, sports bars, offices and estates are a decent share of what we do.
Our guarantee to Durban
Our guarantee to Durban is short enough to read and specific enough to hold us to, which is the only kind worth having.
The diagnosis is free. Whether or not you proceed, and regardless of what we find. There is no call-out fee that materialises afterwards and no diagnostic charge folded quietly into the invoice. If you decide against the repair, you owe nothing and you still leave knowing what is wrong with your set.
The quote is fixed. You approve a number before anything is ordered or opened, and that number is what you pay. If the job turns out harder than we judged, that is ours to absorb. A genuinely separate fault means a phone call and a fresh decision — never a surprise on the bill.
The work is warranted for 12-month. On our workmanship: the fault we fixed, staying fixed. Parts carry their own manufacturer cover in addition. Report a problem with a repair we did and it is triaged the same day.
You pay on completion. After the tested handover, with the set working in front of you. No deposit, no staged payments.
We will tell you not to repair it when that is the honest answer, with the reasoning and a view on what to buy instead.
That is the whole of it — which is why the fine print on our quotes runs to about four lines.
The warranty stays with the set rather than with you, so if you sell the television inside the cover period the new owner inherits what remains. Hand over the invoice with it. That is unusual in this trade and it costs us very little, because a repair done properly does not come back.
TV Health Check in Durban — common questions
Do you service Glenwood, Berea, Musgrave and Morningside?
Yes — Durban and its surrounds including Berea, Morningside, Glenwood, Umbilo and Musgrave are part of our standing coverage, with Nomvula Khumalo in the area regularly. If you're just outside the listed suburbs, call 069 423 8290 anyway; listed areas are our patches, not our limits.
Do you use genuine or compatible parts?
Both, depending on the component — and we'll tell you which one you're getting. Power boards, capacitors and HDMI connectors have a mature, reliable compatible-parts market we use confidently. Screen panels and mainboards lean toward genuine or manufacturer-matched parts, where compatibility matters more. Either way, every part carries our 12-month workmanship warranty.
What is the free diagnosis, exactly?
A proper fault-finding assessment using real test equipment — power measured under load, the panel and backlight checked independently, ports and connectors tested — to identify the actual failed component rather than guess. You get a plain-language explanation of what's wrong and a fixed quote to fix it, with no obligation to proceed through us.
Do you repair TVs you didn't sell or previously service?
All the time — most of our Durban work is TVs bought from a retailer, not from us. We diagnose with proper test equipment, quote the fix fixed, and repair every major brand. You don't need any prior relationship with us to get a fair diagnosis and quote.
My TV won't turn on at all — what's usually wrong?
In the large majority of cases, a failed power supply board or worn-out capacitors — one of the most common and most affordable TV repairs there is. A telltale sign is a faint click or pop when you try to switch it on. We test the board properly before quoting, since a small number of "won't turn on" cases are actually a mainboard fault instead.
How quickly can you repair my TV in Durban?
Most common faults — power boards, HDMI ports, sound, smart-platform issues — are repaired the same visit where we stock the part. Turnaround in Durban is typically same-day. Ordered parts, like screen panels, usually take a few working days once confirmed. If your TV is out for something urgent, say so when you call 069 423 8290 and we prioritise where we can.
My smart TV apps keep crashing or Wi-Fi won't connect — is that a hardware fault?
Usually not. Most smart-platform faults — crashing apps, frozen menus, Wi-Fi that won't hold — are software issues: full storage, corrupted app data or outdated firmware. We try the free software fixes first (cache clearing, firmware updates, a careful factory reset) before treating it as a hardware fault.
Which TV brands do you repair?
All major brands, including Samsung, LG and Hisense sets across the metro — we're not tied to any manufacturer, so the advice on repair vs replace is based on your specific TV, not on what we happen to stock. See our brand guides at /brands/ for what we know about each manufacturer's common fault patterns.